Professional China 700ma Led Driver - 150W Single Output Switching Power Supply LRS-150 – Euchips

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Professional China 700ma Led Driver - 150W Single Output Switching Power Supply LRS-150 – Euchips Detail:

150W Single Output Switching Power Supply LRS-150


LRS-150?series is a 150W single-output enclosed type power supply with 30mm of low profile design. Adopting the full range 115~230VAC input, the entire series provides an output voltage line of 12V, 15V, 24V,?36V and 48V.
In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of LRS-150?that the whole series operates from -30 through 70⊥ under air convection without a fan.?Delivering an extremely low no load power consumption (less than 0.5W), it allows the end system to easily meet the worldwide energy requirement. LRS-150 has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations such as TUV EN60335-1,EN61558-1/-2-16, UL60950-1 and GB4943. LRS-150?series serves as a high price-to-performance power supply solution for various industrial applications.


01. AC input range selectable by switch
02. Withstand 300VAC surge input for 5 second
03. No load power consumption<0.5W
04. Miniature size and 1U low profile
05. High operating temperature up to 70⊥
06. Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection
07. Compliance to IEC/EN 60335-1(PD3) and ? ? IEC/EN61558-1, 2-16 for household appliances
08. Operating altitude up to 5000 meters
09. Withstand 5G vibration test
10. High efficiency, long life and high reliability
11. LED indicator for power on
12. 100% full load burn-in test
13. 3 years warranty

Technical Parameter

Product Name

150W Single Output Switching Power Supply LRS-150



LRS-150-15 LRS-150-24 LRS-150-36





Related Current


10A 6.5A 4.3A

Current Range


0~10A 0 ~6.5A 0 ~ 4.3A

Reted Power


150W 156W 154.8W

Ripple & Noise(Max.) Note.2


150mVp-p 200mVp-p 200mVp-p

Voltage ADJ. Range

10.2 ~ 13.8V

13.5 ~ 18V 21.6 ~ 28.8V 32.4 ~ 39.6V

Voltage Tolerange Note.3


㊣1.0% ㊣1.0% ㊣1.0%

Line Regulation Note. 4


㊣0.5% ㊣0.5% ㊣0.5%

Load Regulation Note. 5


㊣0.5% ㊣0.5% ㊣0.5%

Setup, Rise Time

500ms, 30ms/230VAC 500ms,30ms/115VAC at full load

Hold Up Time(Typ.)

40ms/230VAC 35ms/115VAC at full load


Voltage Range

85 ~ 132VAC / 170 ~ 264VAC by switch 240 ~ 370VDC(switch on 230VAC)

Frequency Range

47 ~ 63Hz



88.5% 89% 89%

AC Current(Typ.)

2.8A/115VAC 1.6A/230VAC

Inrush Current


Leakage Current

<0.75mA / 240VAC


Over Load

110 ~ 140% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

13.8 ~ 16.2V

18.75 ~ 21.75V 28.8 ~ 33.6V 41.4 ~ 48.6V

Protection type : Shut down o/p voltage, re-power on to recover


Working Temperature

-30 ~ +70⊥(Refer to “Derating Curve”)

Working Humidity

20 ~ 90% RH non-condensing

Storage Temperature Humidity

-40 ~ +85⊥, 10 ~ 95% RH

Temperature Coefficiency

㊣0.03%/⊥(0 ~ 50⊥)


10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

Safety & EMC

(Note. 9)

Safety Stand Ards

UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1/-2-16,CCC GB4943 approved

Withstand Voltage



I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25⊥/ 70% RH

EMC Emission

Compliance to EN55022 (CISPR22), GB9254 Class B, EN55014, EN61000-3-2,-3

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A



601K hrs min. MIL-HDBK-217F (25⊥)


159*97*30mm (L*W*H)


0.48Kg ; 30pcs/15.4Kg/0.75CUFT


1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25⊥ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed ? ? that it still meets EMC directives. ?For guidance on how to perform these EMC tests, please refer to ?EMI testing of component power ? ? supplies.? (as available on

8. The ambient temperature derating of 5 /1000m is needed for operating altitude greater than 2000m (6500ft).

Product detail pictures:

Professional China 700ma Led Driver -
 150W Single Output Switching Power Supply LRS-150 – Euchips detail pictures

Professional China 700ma Led Driver -
 150W Single Output Switching Power Supply LRS-150 – Euchips detail pictures

Related Product Guide:
Dimmer Lights and Switches – The Light Dimmer & How it Works
Choosing a Leading Edge or Trailing Edge Dimmer for Your Home

Professional China 700ma Led Driver - 150W Single Output Switching Power Supply LRS-150 – Euchips, The product will supply to all over the world, such as: , , ,

  • 5 Stars By from -

    5 Stars By from -

    Related Products